| |
|  |
Preliminary
Technical Program:
Tuesday
August 9, welcome reception (light snacks) 7:30-9:30 PM Liu Center
Wednesday-Thursday August 10-11, main Summit
Friday August 12, Hole Drilling Short Course
See
RSS_Campus_Map.pdf for locations of reception, Summit meetings, and
Wednesday lunch
Wednesday
August 10 8:20AM-4:30PM
Curtis
Law Building
|
7:45-8:15
Registration and packet pickup |
8:20-8:30
Welcome and Introduction |
8:30-9:00
TECHNOLOGY
KEYNOTE: I. Cevdet Noyan, Columbia
University, "Requirements of a Practical Residual Stress
Measurement Technique" abstract |
9:00-9:30
TECHNOLOGY
Michael
R. Hill, University of California, Davis, "Engineered
Residual Stresses"
|
9:30-10:00
INDUSTRIAL EXPERIENCE
James Pillers, The Boeing Company Seattle, "Industrial
Experiences" |
| 10:00-10:30
Coffee Break |
10:30-11:00
INDUSTRIAL EXPERIENCE
Jeff Gordon, Volpe Center, U.S.
Department of Transportation, "Residual Stresses
and Failures in Railroad Rail and Wheels: Experimental and Analytical
Techniques."
|
11:00-11:30
INDUSTRIAL EXPERIENCE
Pingsha Dong, Battelle, "Industrial Welding Residual
Stress Problems, Measurements, and Predictions"
|
11:30-1:15
Lunch
Walk to lunch and cultural presentation at First
Nations Longhouse |
1:15:1:40
TECHNOLOGY
George Totten and Victor Li, Portland State U., "Heat
Treating and Quenching Stresses and Distortion"
|
1:40-2:10
INDUSTRIAL EXPERIENCE
Steve Cockcroft,
UBC, "RS
distribution in
chilled face, cast iron calendar rolls", and "RS
development in A356 Automotive Wheels".
|
2:10-2:35
TECHNOLOGY
Jian
Lu , LASMIS, University of Technology of Troyes France,
"The Recent Development of the Global Industrial Approach
for Residual Stress Consideration: Measurement, Process, Simulation
and Design Issues" |
| 2:35-3:05
Break |
|
3:05-4:30
SHORT UPDATES:
VAMAS
Technical Working Area 20, Jerry Lord, on Neutron
& Synchrotron Standards
Spallation
Neutron Source, Xunli Wang, Oak Ridge National
Laboratory, and Chad Sinclair, U. British Columbia,
VULCAN - the Roman God of Fire and Metalworking at the
Spallation Neutron Source. abstract
RS
Summit Round Robin in Titanium, Brett Johanson,
(Boeing Seattle)
SAE
International, Aquil Ahmad, Eaton Corporation,
on Development of J784a, the Only Recognized Standard
for X-Ray Residual Stress Measurement.
UK's
National
Physical Laboratory, Jerry Lord, Residual
Stress Activities
ASTM
International
* E28.13 (RS Measurement), Andrea
Holloway, Bettis, on new measurement standards
* E08 (Fatigue and Fracture), Michael
R. Hill, on residual stress issues in fatigue and
fracture standards
ENSPED
(European Network on Surface and Prestress Engineering and
Design), Jian Lu , LASMIS, University of Technology
of Troyes France, Introduction of Two Residual Stress
Handbooks and Presentation of a Systematic Reference Analysis
|
| 5:40
Bus Leaves for Conference Dinner probably from Gage Towers.
Details to be provided at registration. |
| |
|
|
Thursday
August 11
8:30AM-4:30PM
Curtis
Law Building
|
8:30-8:35
Introduction |
8:35-9:00
TECHNOLOGY
Eann Patterson , Michigan State University, "Direct
Measurements of the Effect of Residual Stress on Fatigue Crack
Growth Using Thermoelasticity" |
9:00-9:25
TECHNOLOGY
Luis Zamorano,
Third Wave Systems, "Modeling of Residual Stress in
Machined Workpieces and Its Effect on Part Distortion" |
9:25-9:50
TECHNOLOGY
R. Craig McClung, Southwest Research
Institute, "Residual Stresses, Fatigue Crack Growth,
and Life Prediction" |
| 9:50-10:20
Coffee Break |
10:20-10:50
INDUSTRIAL EXPERIENCE
R.W. Schultz and P.A. Vranka, ALCOA,
"Recent Residual Stress Activities at ALCOA" |
10:50-11:20
INDUSTRIAL EXPERIENCE
Ronald
Rogge, NRC,
Chalk River, Canada, "Industrial Case Studies in
Residual Stress: Putting Neutrons to Work for Industry"
|
11:20-11:40
INDUSTRIAL EXPERIENCE
Clifford C. Grupke, DaimlerChrysler, "The Challenge
of Computer Modeling the Effects of Fillet Rolling for Automotive
Crankshafts" |
11:40-12:00
TECHNOLOGY
Douglas
R. Schmitt, University of Alberta, "Stress Measurement
in Nonmetallic
materials: Applications to measurement in the earth"
|
| 12:00-1:00
Catered Lunch |
1:00-1:30
TECHNOLOGY
Michael
B. Prime, Los Alamos, and Gary S. Schajer, UBC, "Overview
and New Developments in Destructive Measurement Techniques" |
1:30-2:00
TECHNOLOGY
Clayton
Ruud , Penn State U, on "Overview and New Developments
of Nondestructive Residual Stress Measurement Techniques"
|
|
2:00-4:00
POSTER
and DEMO SESSION
and Coffee Break
Third
Wave Systems, "Residual Stress and Part Distortion
Prediction in Machined
Workpiece Surfaces" abstract
P. Pagliaro, B. Zuccarello, Department
of Mechanics, University of Palermo, 90128 Palermo, Italy
"Residual Stress Analysis in Orthotropic Materials
by the Hole-Drilling Method" abstract
(pdf)
American
Stress Technologies, Demonstrating XRD and Barkhausen
measurement
Proto
Manufacturing Ltd., X-Ray Diffraction Residual Stress
Analysis
Jahan Rasty,Texas Tech Mechanical Engineering,
"Measurement of Residual Stresses in Nuclear-Grade
Zircaloy-4(R) Tubes - Effect of Heat Treatment" abstract
Bob B. He, Bruker AXS Inc., "Residual
Stress Measurement with Two-dimensional Diffraction".
abstract
Keith Donald, Fracture
Technology Associates, "Residual Stress, ACR, Kmax
Sensitivity Methodology"
Michael R. Hill, University of California,
Davis
demo on "Residual Stress Measurement with the Slitting
(Crack Compliance) Method"
Stefano Beretta, Angela Cerrini, Hernán
Desimone, Politecnico di Milano, Dipartimento di Meccanica
and Tenaris. "Influence of hoop residual stresses on
the torsional fatigue life of tubular components" abstract
(pdf)
Gary Schajer, University of British Columbia,
Demonstration of the Hole-Drilling Method.
Michael Prime, Los Alamos National Laboratory,
"The Contour Method for Measuring Residual Stress."
|
| 4:00-4:30
Discussion, Location of Summit 2007, Closing |
| |
| |
| |
| |
| |
|
|
|
